Turn your ute, van or commercial vehicle into a powered workspace with a custom trade vehicle fitout in Perth. We install 12V dual battery systems, inverters, storage, lighting, communications and accessories around your vehicle, equipment and daily routine. Tell us what you drive and what you need to run, and we will design a practical setup that works.
Charge tool batteries and run equipment without flattening your starter battery.
Every fitout is planned around your tools, vehicle and typical working conditions.
Wiring, protection and accessories installed neatly by qualified auto electricians.
Power, storage, lighting, communications and vehicle accessories handled in-house.
Every trade vehicle fitout is different, so we quote each build around the vehicle, equipment and electrical load. A basic setup may include a dual battery, inverter and battery monitor, while a remote service vehicle may also need Starlink, solar power, UHF communications, work lighting and an air compressor.
Before work begins, we will confirm the recommended setup, installation requirements, expected timeframe and cost. If we identify anything else during the fitout, we will discuss it with you before proceeding. No mystery accessories appearing on the final bill.
We build trade vehicle electrical systems around the equipment you use each day. Your fitout can be kept simple or expanded into a complete mobile workspace with power, storage, lighting and remote communications.
Our trade vehicle fitout services include:
Find a practical setup for your trade. Most builds start with a 12V dual battery system, inverter and battery monitor for charging tool batteries, running a fridge or heating lunch without flattening the starter battery. Remote workers can also add vehicle Starlink.
Keep inspection gear, press tools, pumps and battery chargers powered between jobs.
Common and popular fit-out optionsCharge saw, drill and nail-gun batteries while keeping fixings and hand tools sorted.
Common and popular fit-out optionsRun chargers, laptops and site communications when the vehicle doubles as a mobile office.
Common and popular fit-out optionsPower mixers, lasers, radios and tool chargers through long days on new-build sites.
Common and popular fit-out optionsKeep screed, vibrator, laser and general tool batteries ready across early starts and long pours.
Common and popular fit-out optionsCharge cutting, fastening and sealing tools while keeping gear visible before sunrise.
Common and popular fit-out optionsKeep mixers, cutters, vacuums and cordless tool batteries charged between installations.
Common and popular fit-out optionsPower lights, sprayers, sanders and chargers while keeping daily gear easy to reach.
Common and popular fit-out optionsRun chargers and work lights for sanding, fixing and finishing jobs across changing sites.
Common and popular fit-out optionsKeep suction equipment, sealant tools and cordless gear powered during mobile installations.
Common and popular fit-out optionsCharge precision tools and keep hardware, fixings and measuring gear sorted for installs.
Common and popular fit-out optionsCharge cordless tools, test equipment and a laptop while keeping cables and components organised.
Common and popular fit-out optionsPower test gear, laptops and tool chargers on metro rooftops or remote energy projects.
Common and popular fit-out optionsRun laptops, testers, monitors and tool chargers when commissioning systems on site.
Common and popular fit-out optionsKeep fibre tools, testers, laptops and radios powered during installations and fault finding.
Common and popular fit-out optionsCharge testing equipment and power service gear across scheduled maintenance calls.
Common and popular fit-out optionsPower laptops, test screens and cordless tools while protecting cables and small components.
Common and popular fit-out optionsRun diagnostic gear, chargers, lights and workshop equipment wherever a breakdown happens.
Common and popular fit-out optionsSupport high-use tools, diagnostics and repairs on civil, farming and mining equipment.
Common and popular fit-out optionsCharge tools, gauges and test equipment across installations, maintenance and emergency call-outs.
Common and popular fit-out optionsPower test meters, laptops and tool chargers while keeping common spares sorted.
Common and popular fit-out optionsRun key equipment, grinders, laptops and chargers from a secure mobile workspace.
Common and popular fit-out optionsCharge outdoor power equipment and keep food, drinks and tools sorted through hot days.
Common and popular fit-out optionsPower chargers, communications and work lights across tree work and emergency call-outs.
Common and popular fit-out optionsCharge drills, drivers and cutters while supporting compressors and trailer equipment.
Common and popular fit-out optionsPower sprayer batteries, inspection gear and chargers across a full day of appointments.
Common and popular fit-out optionsCharge test equipment, pumps and tools while keeping fittings organised and visible.
Common and popular fit-out optionsCharge GNSS gear, drones, laptops and radios while working beyond easy access to power.
Common and popular fit-out optionsSupport charging, lighting, communications and tyre inflation through long shifts away from the depot.
Common and popular fit-out optionsKeep service tools, communications and personal equipment powered across remote shifts.
Common and popular fit-out optionsPower communications, lighting and crew gear across night works and changing road sites.
Common and popular fit-out optionsNo trades match your search. Try another trade or ask our team about a custom setup.
See how we turn everyday work vehicles into practical, powered fit-outs built for the job.
We build trade vehicle fitouts for Perth contractors, mobile technicians, remote workers and commercial fleets. From a straightforward dual battery and inverter installation to a complete mobile workspace, our qualified auto electricians will help you choose the right equipment and install it properly.
We work with common trade utes, vans, cab-chassis vehicles and light trucks used across Australia. This includes current models and plenty of familiar workhorses still earning their keep. If your vehicle is not listed, get in touch and we can confirm whether we can help.
A useful trade vehicle fitout starts with understanding what happens during your working day. We look at your vehicle, tools, equipment, power requirements and working locations before recommending a system. 01
Let us know what you drive, what equipment you carry and how you use the vehicle. This includes the tools you need to charge, the accessories you want to run and whether you work around Perth or in remote areas. 02
We identify the chargers, fridge, pie warmer, Starlink equipment, lighting and other accessories that will use power. This helps us estimate the expected electrical load. 03
We recommend a dual battery, inverter and battery monitoring setup suited to your equipment. The inverter must be sized for the appliances and chargers you plan to use, rather than chosen on wattage alone. 04
You can add drawers, canopy lighting, UHF communications, Starlink, spotlights, air compressors, towing accessories, cameras and solar power where required. 05
We plan where the main components, switches, outlets and accessories will be installed. The layout must remain practical, protected and easy to use during the working day. 06
We provide a quote based on the agreed equipment and installation work. You will know what is included before we begin. 07
Our auto electricians install the system, protect the wiring and test the connected equipment. We check that the system charges and operates as intended before returning the vehicle. 08
We show you how to operate the system, read the battery monitor and manage the electrical load. You will also know which equipment can run together and when the auxiliary battery needs charging.
Voltaic Auto Electrical & Air Conditioning is a proudly Western Australian owned and operated business established in 2017. From our Perth workshops, we provide trade vehicle fitouts, dual battery installations, Starlink systems, UHF radios, lighting, cameras, fleet services and heavy-duty auto electrical work.
Owner Josh Doutch has more than 20 years of hands-on experience and holds trade qualifications as an automotive electrician and mobile plant mechanic. His background includes working on underground mining equipment, heavy-duty machinery and modern vehicle electrical systems.
Our team focuses on safe workmanship, practical advice and clear communication. We explain what your vehicle needs, confirm costs before additional work proceeds and install each system with the care expected from qualified auto electricians.
We can fit out many utes, vans, 4WDs and commercial vehicles used by Perth tradespeople and mobile service teams. The available mounting locations and accessory options depend on the vehicle, canopy, toolbox and existing equipment. Contact us with your make, model and setup so we can confirm what is possible.
A trade vehicle fitout can include a dual battery system, inverter, battery monitor, fridge, pie warmer, drawers, canopy lighting, toolbox lighting, Starlink, UHF communications, spotlights, solar power, an air compressor, towing accessories and dash cameras. We only recommend the equipment that suits your work and vehicle.
The cost depends on the vehicle, battery capacity, inverter size, accessories and installation work required. A dual battery and inverter setup will cost less than a complete remote-work fitout with Starlink, solar, communications, lighting and storage. We will provide a clear quote once we understand your requirements.
Yes, a correctly designed dual battery and inverter system can charge compatible cordless tool batteries. We need to know the wattage and number of chargers you expect to use so we can recommend a suitable inverter, battery capacity and charging system.
A properly installed dual battery system separates your work accessories from the starter battery. Your chargers, fridge, pie warmer and other equipment draw power from the auxiliary battery, helping preserve the starter battery for starting the vehicle.
Yes. We install Starlink systems for vehicles used on remote properties, civil projects, mine sites and regional jobs. We can plan the hardware mounting, power supply and cable routing around the vehicle. You will still need a suitable Starlink service plan and a clear view of the sky when using the system.
Yes, in many cases we can install electrical equipment, lighting, drawers and accessories into an existing canopy or toolbox. We will inspect the available space, construction and current wiring before recommending the layout.
We can help with a single trade vehicle or a larger commercial fleet. For multiple vehicles, we can develop a consistent fitout specification while allowing for differences between vehicle models and working roles.
The timeframe depends on the size and complexity of the build, accessory availability and whether the vehicle already has a canopy or existing electrical system. We will provide an expected timeframe with your quote.
Warranty coverage depends on the products and installation work included in your fitout. We will explain the applicable product and workmanship warranty terms when preparing your quote.
